MCV 800 QUICK

  • X / Y / Z - 800 / 500 / 550 mm
  • Table clamping surface: 1 000 x 500 mm
  • Max. weight on table: 500 Kg
  • Max. speed: 12 000 rpm

  • Linear rolling guides with direct measuring of all axes
  • Increased starting of X axis = 800 mm
  • Small built-up machine area, improved ergonomics ⇒ lower spatial requirements
  • Innovation of kinematic con guration of cross-table ⇒ Increased static rigidity of load-bearing structure
  • New developed machine variant with worm chip conveyor ⇒ compactness (machine length decreased by 1200 mm as compared to link conveyor)
  • Increased number of clamping grooves on the table
  • Heidenhain TNC620, Siemens 828D control system
  • Innovated spindle ⇒ Decreased noise level, maximum revolutions incerased to 12 000 min-1
TECHNICAL DATA   MCV 800
QUICK
Main dimensions    
Table clamping surface mm 1000 × 500
Number of table T-slots ks 5
Table T-slots width and spacing mm 18 / 100
Largest table track length (X) mm 800
Largest slide track length (Y) mm 500
Largest spindle track length (Z) mm 550
Maximum workpiece weight (table load) kg 500
Max. workpiece dimension for max. tool length mm 800 × 500 × 300
Maximum drilling diameters (motor 10 kW)    
Drilling full diameter to steel of strength 600 MPa with drill bit from RO mm 25
Drilling full diameter to steel of strength 600 MPa with drill bit mm 30
Thread diameter with cutting to steel with strength 600 MPa mm M20
Spindle    
Spindle taper - ISO 40
Distance from spindle nose to table clamping surface mm 100 - 650
Maximum speed min-1 12 000
Spindle motor power (S1/S6 - 40%) kW 10 / 14
Spindle motor torque (S1/S6 - 40%) Nm 63 / 88
Speed change - continuously variable
Tool clamping force N 18 000
Accuracy    
Measuring system X, Y, Z Heidenhain / Siemens - direct
Feed rate    
Rapid feed mm.min-1 30 000
Working feed m.min-1 15 000
Ball screw - Diameter mm 32
Ball screw - Pitch mm / rpm 10
Max. tank capacity l 200 + 80
Pneumatic equipment    
Working pressure MPa 0,6
Air consumption m3/hour 3-4
Machine dimensions    
Length mm 2086
Width mm 2745
Height mm 2420
Weight kg 4000
Connection of the machine    
Max. total machine input kVA 20
Tool magazine    
Number of positions - left magazine - 24
Max. tool length mm 250
Max. tool diameter - All positions occupied mm 80
Max. tool diameter Neighbouring position skipping mm 120
Change time of adjacent tool (tool – tool) s 3,8
Max. tool weight kg 6,5
Max. tool weight in the magazine kg 65

Working space

Pracovní prostor

CONTACT US:

OR WRITE US:

By clicking on “Send”, I expressly agree to the processing and keeping of all my personal data I provide through KOVOSVIT MAS, a.s. in accordance with Act No. 101/2000 Coll., as amended. I provide this information to KOVOSVIT MAS, a.s., as a personal data administrator or as its authorized representative, for the sole purpose of providing information no later than three years after they have been sent.


* Required fields